Why Choose Aqua Pro Yacht Maintenance
Expert Yacht Maintenance:
20+ years serving Miami-Dade and Broward County. our professional divers who know South Florida waters. All work performed underwater at your dock — no haul-out, no boatyard, no disruption to your schedule.
Trusted Professionals
Licensed, fully insured, and Florida DEP compliant. We document every service with before and after photos sent directly to your phone. Available at all major marinas from Miami to Deerfield Beach.
Trusted by South Florida Boat Owners
Our divers have serviced thousands of vessels — from 20ft center consoles to 100ft sportfish yachts. We use soft-bristle brushes and marine-safe products that protect your bottom paint and Florida’s waterways.
What Zinc Anodes We Replace
Underwater anode replacement at your dock.
Zinc anodes are sacrificial metals bolted to your hull, shaft, propeller, trim tabs, and engine. In salt water they corrode first, protecting the expensive underwater metal around them. Once an anode is more than about half gone it stops doing its job, and your running gear starts to corrode.
Why Choose Aqua Pro for Zinc Replacement
Certified divers, photo documentation, honest assessments.
Our divers replace every anode on your boat underwater, at the dock — hull, shaft, prop nut, trim tabs, and engine zincs. We match the correct anode type to your water (zinc for salt, aluminum for brackish) and document each one with photos before and after.
When to Replace Your Zincs
How often to check and replace your anodes.
Most boats in South Florida need their anodes checked every couple of months and replaced two to four times a year, depending on how the boat is wired, how often it runs, and stray current at the marina. We check your zincs on every hull cleaning and tell you when they actually need changing.
Our Zinc Replacement Process
Defending your running gear from corrosion.
We inspect anodes at every location — hull, propulsion, lower unit, and cooling system — and replace what is worn before it puts your gear at risk. It is a small, inexpensive service that prevents thousands of dollars in corrosion damage.
See Our Divers at Work in Miami
See our divers at work below — real hull and running-gear cleaning at the dock across Miami-Dade and Broward, with no haul-out required.
What's Included
- “Inspection and condition rating of all zincs
- “Replacement of any zinc consumed over 50%
- “Hull, shaft, rudder, and keel zincs serviced
- “Photo documentation of each anode
- “Galvanic corrosion risk assessment
- “certified diver ”” no haul-out needed
How It Works
Book Online
Schedule in 2 minutes at aquaproyachtmaintenance.com/book. Choose your service, marina, date and time.
We Dive
Our certified diver arrives at your marina with all equipment. No haul-out, no disruption to your schedule.
Proof Sent
Before and after photos delivered to your phone within hours of service completion.
Frequently Asked Questions
How often do zinc anodes need replacement in Miami?
In Miami's warm, conductive saltwater, zincs deplete faster than in colder northern waters. We check and replace as needed on every cleaning visit ”” typically every 4”“8 months.
What happens if I let my zincs run out?
Depleted zincs leave your propeller shafts, rudder fittings, and through-hulls unprotected from galvanic corrosion. Replacement costs for shafts and props can run into thousands of dollars.
Do you stock common zinc sizes?
Our dive team carries the most common shaft, hull, and rudder zinc sizes on every service call. Same-day replacement is standard practice.
Ready to Book Zinc Anode Replacement?
our professional divers · No haul-out · Miami-Dade & Broward
Book This Service